What is the course
Course Overview
The CATIA V5 Interrogators training course will first explain how to use the CATIA V5 workbenches. It will then teach you how to review an existing part by verifying its properties, coordinates and measurements. You will also learn how to add annotations to the parts.
The course is not intended to teach the creation of CATIA parts, drawings and assemblies and is purely for the extraction of engineering information.
What you learn
Learning Objectives
- Interrogate and capture information from existing Parts
- Interrogate and capture information from existing Drawings
- Interrogate and capture information from existing Assemblies
What You'll Learn
Course Agenda
Lesson 1: Introduction to CATIA
- In this lesson, you will learn how to use CATIA and its key features.
Lesson 2: Managing the Material Properties
- In this lesson, you will learn how to open models, apply materials, check properties and save and close the models.
Lesson 3: Reviewing and Annotating the Part
- In this lesson, you will learn how to measure and annotate the parts.
Lesson 4: Introduction to Assemblies
- In this lesson, you will learn about data management and assembly design.
Lesson 5: Assembly Analysis and Sections
- In this lesson, you will learn how to analyse the assembly, create scenes and create annotations.
Training Methods
Choose from three different training methods available to you
Group / Classroom Training
Receive CATIA V5 Interrogators training in a group in a traditional classroom environment. Courses can be taken in one of our training locations in the UK, Ireland, US or Canada using DS approved training content and methodologies.
Advantages
- Cost effective training method.
- Leave the office to concentrate on learning.
- Learn more through group questions and feedback.
Live Online Training
With online training you will experience an interactive learning environment where you can give feedback, gain access to the training files and get time to work on training exercises.
Advantages
- Online courses can maximise convenience and save on travel expenses.
- More effective than video based training, with recorded videos learners are often not as focused on the training and skip exercises.
On-Site Training
Receive training at your place of work. This style of flexible training is perfect for teams or individuals who are faced with a specific challenge and require personalized courses with on-the-job coaching.
Advantages
- Use our state-of-the-art mobile classroom at your facility.
- Bring your team up to a consistent level of knowledge by having them take the same training at the same time.
- Benefit from flexible scheduling options.
Upcoming Courses
If you do not see a suitable training course scheduled below please contact us. Our training team are happy to discuss your requirements and can schedule additional courses or arrange onsite or bespoke training to suit your needs.
Course
Date
- August 19, 2026 - August 20, 2026
Time
9:00 am - 5:00 pm BSTLocation
Virtual ClassroomCourse
Date
- October 28, 2026 - October 29, 2026
Time
9:00 am - 5:00 pm GMTLocation
Virtual ClassroomMore Training Courses
CATIA V5 Mechanical and Surface Design Fundamentals
This CATIA V5 fundamentals course will enable students to operate CATIA V5 using best practices within the disciplines of Mechanical and Surface Design.
SIMULIA Abaqus/Explicit Advanced Topics
This course emphasizes practical skills and techniques that are needed for analyses with SIMULIA Abaqus/Explicit. Recommended for relatively new users and Abaqus/Standard users who want to learn Abaqus/Explicit.
Introduction to SIMULIA Abaqus
In this practical SIMULIA Abaqus training course you will learn how to solve linear and nonlinear problems, submit and monitor analysis jobs and view simulation results.